Description

PPS 2.0 H/O Pressurized Cup With By-Pass Regulator & Gauge

Manufacturer: 3M, C.A. Technologies

Part Number:

• 52-5R2
• CA91-5XX

Description: The H/O Cup and Regulator allow for the cup to be pressurized (up to 10psi) vs relying on gravity alone, providing a cup gun solution for spraying higher viscosity coatings without thinning. This improves the quality of any finish with less waste. HIGHLY recommended for 2k coatings.

3M 2.0 Lids and Liners required for complete system.

The 3M PPS (Paint Preparation System) is a unique, closed paint system that eliminates the need for separate mixing cups and filters. Instead, paint is mixed in a liner bag which marries to a direct filter and is then mounted on the spray gun with a dedicated adapter. As freshly filtered paint is dispensed, the liner bag collapses, allowing the spray gun to function at any angle. Liner bags and filters are disposable, leaving only the spray gun and adapter to be cleaned. The 3M PPS Paint Preparation system is a cleaner, faster system, safe from outside contamination, and offers considerable time and solvent savings on gun and parts cleaning.

3M PPS 2.0 type H/O paint pressure cup, collar, and air hose is designed to spray thick high-viscosity liquid material with the 3M Accuspray HGP Spray Gun and PPS 2.0 lids and liners. With the pressure cup, the air is forced through the air hose to collapse the liner and push out the paint material. Ideal for applying undercoating, truck bed liners, sprayable adhesives, sound dampening coatings, high-build primers, and gelcoats. The pressure cup system produces a smooth, consistent spray pattern that lets you quickly build mil thicknesses and limits overspray for less product waste and less cleanup. Unlike with conventional aluminum or other metal paint cup systems, with PPS you dont have to mix paint in extra cups and filter it into a paint reservoir, so you waste less material. Simply place a liner in the reusable paint cup, mix the material, snap on the lid and youre ready to spray. With a fresh lid and liner for each mix, theres less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems.

PPS Key Features
Up to 70% savings of clean solvent
Closed system reducing outside contamination
Faster system from mixing to disposal
Spray gun can function at any angle
Available in 200 ml and 850 ml sizes
Less operator exposure to solvents and reduction in VOCs

New Series 2.0 PPS Features
Four-point connection on the adapter to the lid for increased stability
Quarter-turn lid-locking system for quick assembly and disassembly
Larger fluid passage opening in the adapter and lid to allow more material flow
Standard hard cups have measurements printed directly on the plastic
Lids and collars are now combined into one locking piece

The H/O pressurized cups by 3M offer an easy and clean solution to spraying thicker viscosity materials. Screw on type lid collar to ensure a nice and secure seal when pressurized.

Literature:

• 3M PPS 2.0 Cup System – Brochure
• Adapter Chart